|
Parameter
Name |
|
機能 |
|
EXP_ETACTUAL |
1 |
Exposure Time |
|
EXP_SEQUENTS |
2 |
Number of sequential frames |
|
EXP_ERROR |
3 |
Last controller error |
|
EXP_GETCAPS |
4 |
|
|
EXP_GETPLSR |
5 |
|
|
EXP_DETECTOR_BIT |
16 |
|
|
EXP_RUNNING_APP |
23 |
Get online process running status |
|
EXP_VIDEO_TYPE |
24 |
Video type NTSC Pal or Custom. (DC131&ST133) |
|
EXP_CUSTOM_VIDEO_X |
25 |
Custom video x dimension |
|
EXP_CUSTOM_VIDEO_Y |
26 |
Custom video y dimension |
|
EXP_CUSTOM_VIDEO_FSTWIDTH |
27 |
Custom fast video x dimension |
|
EXP_CUSTOM_VIDEO_LSTWIDTH |
28 |
Custom fast video y dimension |
|
EXP_VIDEO_XDIM |
29 |
X dimension of video |
|
EXP_VIDEO_YDIM |
30 |
Y dimension of video |
|
EXP_VIDEO_MAX_ZOOM |
31 |
Max zoom allowed for selected chip |
|
EXP_VIDEO_HORZ_PAN |
32 |
True if zoom panning enabled for horz |
|
EXP_VIDEO_VERT_PAN |
33 |
True if zoom panning enabled for vertical |
|
EXP_WORD_MULTIPLIER |
34 |
Factor for Doing Small ROI's With PCI |
|
EXP_TARGET_ID |
35 |
Set/Get SCSI Target ID. (LONG) |
|
EXP_ADAPTER_ID |
36 |
Set/Get SCSI Adapter ID. |
|
EXP_NUMADAPTORS |
37 |
Get number of SCSI adapters. |
|
EXP_FORCE_PP_INIT |
38 |
Force an init in physical port. |
|
EXP_NOP_ADC |
39 |
NOP count to slow up transfer speed |
|
EXP_ACTUAL_TEMP |
40 |
Detector actual temperature (ST133). Get only |
|
EXP_FORCE_AUTOSTOP |
41 |
For ST133 - force the autostop in live DC |
|
EXP_DEFAULT_VTCLK |
42 |
Default vertical clock. |
|
EXP_MIN_VTCLK |
43 |
Min value of vertical clock. |
|
EXP_MAX_VTCLK |
44 |
Max value of vertical clock. |
|
EXP_DEFAULT_HTCLK |
45 |
Default horizontal clock. |
|
EXP_MIN_HTCLK |
46 |
Min value of horizontal clock. |
|
EXP_MAX_HTCLK |
47 |
Max value of horizontal clock. |
|
EXP_TIMING_STYLE |
48 |
Either Thomson or EEV. |
|
EXP_HEADSELECT |
49 |
Head Select setting. |
|
EXP_HORZPHASE |
50 |
Horizontal phase. |
|
EXP_VERTPHASE |
51 |
Vertical phase. |
|
EXP_SPECIAL_SPEED |
52 |
Special speed setting for st138. |
|
EXP_PRE_STRIPS |
53 |
Pre dummy strips. |
|
EXP_POST_STRIPS |
54 |
Post dummy strips. |
|
EXP_PRE_LINES |
55 |
Pre dummy lines. |
|
EXP_POST_LINES |
56 |
Post dummy lines. |
|
EXP_ACTIVE_LINES |
57 |
Active lines in the current chip. |
|
EXP_ACTIVE_STRIPS |
58 |
Active strips in the current strip. |
|
EXP_XFER_EXTRA |
59 |
Frame transfer - extra dummies in middle. |
|
EXP_MIN_BLOCK |
60 |
Minimum block for skips. |
|
EXP_NUM_MIN_BLOCK |
61 |
Minimum number of blocks to skip. |
|
EXP_CELL_X_SIZE |
62 |
X dimension of pixel |
|
EXP_CELL_Y_SIZE |
63 |
Y dimension of pixel |
|
EXP_X_GAP_SIZE |
64 |
X gap between pixels |
|
EXP_Y_GAP_SIZE |
65 |
Y gap between pixels |
|
EXP_LOGIC_OUTPUT |
66 |
For PentaMax >= V5 BNC output |
|
EXP_VIDEO_BLANK |
67 |
For PentaMax >= V5 video blanking on/off |
|
EXP_ZOOM_MODE_VIDEO |
68 |
For PentaMax >= V5 zoom by 2 test |
|
EXP_LEVEL_SYNC |
69 |
For PentaMax >= V5 level synchronization |
|
EXP_DISABLE_LASER |
70 |
MicroMax special value |
|
EXP_ACQBACK_SHUTTER |
71 |
Acquire Background Shutter Mode |
|
EXP_ACQFLAT_SHUTTER |
72 |
Acquire Flat Field Shutter Mode |
|
EXP_SMALL_CCD_MINEXP |
73 |
Interline CCD PID_582x782 min exposure |
|
EXP_LARGE_CCD_MINEXP |
74 |
Interline CCD PID_1030x1300 min exposure |
|
EXP_GATING_MODE |
75 |
Interline CCD Gating Mode Enable |
|
EXP_ILME_B1X |
76 |
Interline Focusing Min Exp - X1 Binning |
|
EXP_ILME_B2X |
77 |
Interline Focusing Min Exp - X2 Binning |
|
EXP_ILME_D1X |
78 |
Interline Focusing Min Exp - X1 Decimation |
|
EXP_ILME_D2X |
79 |
Interline Focusing Min Exp - X2 Decimation |
|
EXP_ILME_D4X |
80 |
Interline Focusing Min Exp - X4 Decimation |
|
EXP_INIT_HW_ACCUM |
81 |
Initialize hardware accum (st138). |
|
EXP_5X_GAIN_ENABLE |
82 |
Enable 5X Gain on ST133s |
|
EXP_RET_SRCCMP |
83 |
ST130 only return source comp with data |
|
EXP_EVENT_HANDLE |
84 |
|
|
EXP_READOUT_MODE |
85 |
IsAvail readout mode. |
|
EXP_SHUTTER_TYPE |
86 |
IsAvail Shutter type. |
|
EXP_USER_DEFINED_CHIP |
87 |
IsAvail user defined chip. |
|
EXP_USER_DEFINED_TIMING |
88 |
IsAvail user defined timing. |
|
EXP_CONTROLLER_VERSION |
89 |
IsAvail controller version is writable. |
|
EXP_GET_CONTROLLER_VER |
90 |
IsAvail if controller ver is readable. |
|
EXP_TTL_LINES |
91 |
IsAvail TTL control lines (in and out). |
|
EXP_BIT_ADJUST |
92 |
IsAvail Bit adjust |
|
EXP_RESOLUTION |
93 |
IsAvail bit resolution |
|
EXP_GAIN |
94 |
IsAvail ADC gain. |
|
EXP_ADC_RATE |
95 |
IsAvail can AEC Rate be retrieved. |
|
EXP_ADC_TYPE |
96 |
IsAvail can you pick an ADC. |
|
EXP_NUMBER_OF_CLEANS |
97 |
IsAvail number of cleans. |
|
EXP_NUM_OF_STRIPS_PER_CLN |
98 |
IsAvail number of strips per clean |
|
EXP_INTERFACE_CARD |
99 |
IsAvail interface card |
|
EXP_INTERRUPT |
100 |
IsAvail Can you get what the interrupt is |
|
EXP_IO_ADDRESS1 |
101 |
IsAvail Can the IO address be read/write |
|
EXP_IO_ADDRESS2 |
102 |
IsAvail Can the IO address be read/write |
|
EXP_IO_ADDRESS3 |
103 |
IsAvail Can the IO address be read/write |
|
EXP_HW_ROI |
104 |
IsAvail Can an ROI be set by hardware |
|
EXP_HW_BINNING |
105 |
IsAvail can hardware binning be done |
|
EXP_EDGE_TRIGGER |
106 |
IsAvail can you set the edge of trigger |
|
EXP_SHUTTER_CONTROL |
107 |
IsAvail Shuter control (open/closed/etc.) |
|
EXP_RS170 |
108 |
IsAvail is RS170 available? |
|
EXP_RS170_COMPLEX |
109 |
IsAvail is complex (panning/zooming) Rs170 avail |
|
EXP_HW_RS170_LUT |
110 |
IsAvail is there a hardware Lut for RS170 |
|
EXP_RS170_INTENSITY_SCALING |
111 |
IsAvail intensity scaling for RS170 |
|
EXP_RS170_OFFSET |
112 |
IsAvail Offset for RS170. |
|
EXP_RS170_PAN |
113 |
IsAvail panning ability in RS170. |
|
EXP_RS170_ZOOM2X |
114 |
IsAvail zoom 2x. depends on controller & chip |
|
EXP_RS170_ZOOM4X |
115 |
IsAvail zoom 4x. depends on controller & chip |
|
EXP_RS170_BINNING |
116 |
IsAvail binning depends on controller & zoom. |
|
EXP_RS170_DECIMATION |
117 |
IsAvail decimation depends on controller & zoom |
|
EXP_HW_ACCUM |
118 |
IsAvail hardware accumulation. |
|
EXP_SHT_PREOPEN |
119 |
IsAvail Shutter preopen (1) or normal (0). |
|
EXP_STORE_STROBE |
120 |
IsAvail Store strobe timing mode. |
|
EXP_CONT_CLNS |
121 |
IsAvail continuous cleans |
|
EXP_TIMING_MODE |
122 |
IsAvail timing mode. freerun ext-sync or software-trigger |
|
EXP_EXT_TRIGGER |
123 |
IsAvail external trigger enable. |
|
EXP_EVENT_COUNTER |
124 |
IsAvail event counter for ST121. |
|
EXP_SW_TRIGGER |
125 |
IsAvail software trigger |
|
EXP_KINETICS_WINDOWSIZE |
126 |
IsAvail kinetics windows size settings. |
|
EXP_EXPOSURE |
127 |
Exposure Time set/get (with IsAvail too) |
|
EXP_CONTROLLER_NAME |
128 |
Controller Name |
|
EXP_CCD_CHIP_NAME |
129 |
CCD Chip Name |
|
EXP_BSWBINNING |
297 |
|
|
EXP_EDGEENHANCE |
130 |
|
|
EXP_BOXVIDEOGAIN |
131 |
|
|
EXP_HSHADING_VALUE |
132 |
|
|
EXP_VSHADING_VALUE |
133 |
|
|
EXP_EDGEENHANCE_FLAG |
134 |
|
|
EXP_SHADING_FLAG |
135 |
|
|
EXP_GRAYSCALE |
136 |
|
|
EXP_OFFSET |
137 |
|
|
EXP_CCDGAIN |
138 |
|
|
EXP_TEMPERATURE |
139 |
|
|
EXP_MCPVOLTAGE |
140 |
|
|
EXP_BOXEXPOSURE |
141 |
|
|
EXP_ABC_FLAG |
142 |
|
|
EXP_GAMMA_FLAG |
143 |
|
|
EXP_AUTOBLACK_FLAG |
144 |
|
|
EXP_AGC_FLAG |
145 |
|
|
EXP_ODD_FIELD |
146 |
|
|
EXP_FIELD_SELECT |
147 |
|
|
EXP_RESET |
148 |
|
|
EXP_EXTERN_ENABLE |
149 |
|
|
EXP_CONTROLLERS_SUPPORTED |
150 |
IsAvail controllers supported by this chip |
|
EXP_VTCLK |
151 |
Vertical Clock. |
|
EXP_HTCLK |
152 |
Horizontal Clock. |
|
EXP_GATE_VS_CW |
153 |
VICCD Mode |
|
EXP_COM_PORT |
154 |
ICCD COM port used |
|
EXP_US_UNITS |
156 |
IsAvail good defaults for exposure if in micro sec. |
|
EXP_MS_UNITS |
157 |
IsAvail good defaults for exposure if in milliseconds. |
|
EXP_SEC_UNITS |
158 |
IsAvail good defaults for exp if in sec. |
|
EXP_MIN_UNITS |
159 |
IsAvail good defaults for exposure if in min. |
|
EXP_HRS_UNITS |
160 |
IsAvail good defaults for exposure if in hrs. |
|
EXP_FRAME_UNITS |
161 |
Only the VICCD & Control Box Support this unit |
|
EXP_SYNC_ASYNC |
162 |
Is the controller able to do sync and/or async |
|
EXP_FOCUS_NFRAME |
163 |
Does the controller support focus &/or nframe. |
|
EXP_TIMEOUT |
164 |
Time Out For Run Sequencer (Viccd) Mainly |
|
EXP_TIMEOUT_DEFAULT |
165 |
Time Out for holding old Run Seq timeout. |
|
EXP_HW_AUTOSTOP |
166 |
IsAvail for hardware autostop capability |
|
EXP_RS170_INTEN_OFFSET |
167 |
Use Intensity/offset allowed. |
|
EXP_CONTROLLER_ALIVE |
168 |
Is controller alive? |
|
EXP_FOCUS_TYPE |
169 |
Focusing - Binning or Decimation |
|
EXP_FOCUS_ZOOM |
170 |
Focusing - X1 X2 or X4 |
|
EXP_FOCUS_PAN |
171 |
Focusing - pan position |
|
EXP_MULTI_TAP_ROI |
172 |
IsAvail for multi-tap ROI dialog available. |
|
EXP_USE_INTERUPTS |
173 |
IsAvail for if data collection should use eof |
|
EXP_DATA_ACQ_STATE |
174 |
Holds Data Acquisition state.(run sequencer) |
|
EXP_VERIFY_GOOD_VALUES |
175 |
Make SetParam check that good values are being used. |
|
EXP_WHITE_CLAMP |
176 |
Frame Grabber White Clamping Level |
|
EXP_BLACK_CLAMP |
177 |
Frame Grabber Black Clamping Level |
|
EXP_DELAY_TIME |
178 |
Delay between acquisitions. |
|
EXP_READOUT_TIME |
179 |
Readout time of experiment. |
|
EXP_SW_DIAG |
180 |
Flag for SW Diagnostics. Set by DLL |
|
EXP_DIAG1 |
181 |
Set parameter for diagnostics and testing. |
|
EXP_DIAG2 |
182 |
Set parameter for diagnostics and testing. |
|
EXP_DIAG3 |
183 |
Set parameter for diagnostics and testing. |
|
EXP_DIAG4 |
184 |
Set parameter for diagnostics and testing. |
|
EXP_DIAG5 |
185 |
Set parameter for diagnostics and testing. |
|
EXP_AorB_GROUP |
186 |
VICCD Group Selected |
|
EXP_ABSORBANCE_FLAG |
187 |
Absorbance Flag |
|
EXP_ABSORBANCE_METHOD |
188 |
Current Method of which to do absorbance |
|
EXP_ABSORBANCE_STRIPNUM |
189 |
If stripmode Absorbance then this is current strip |
|
EXP_DMASIZE_VIA_DRIVER |
190 |
Amount of memory actually allocated by driver |
|
EXP_DRIVERVERSION |
191 |
Version of the Driver |
|
EXP_NUM_DEVICES |
192 |
Number of PCI Cards Found |
|
EXP_ECPDMA_CHANNEL |
193 |
DMA Channel for ECP 0 - 3 |
|
EXP_CUSTOM_SHUTTER |
194 |
Custom shutter time |
|
EXP_ADC_OFFSET |
195 |
ADC Offset for head |
|
EXP_CURRENT_READOUT_MODE |
196 |
The Current Readout mode |
|
EXP_BANK_ADD |
197 |
SETS BANK TO USE FOR SCAN PATTERNS |
|
EXP_LUT_BANK |
198 |
LUT bank to use (ST133) |
|
EXP_SETUP_STATUS |
201 |
Experiment Setup Status Bits |
|
EXP_XY_GROUPING |
239 |
|
|
EXP_MESSAGES_FLAG |
240 |
|
|
EXP_TTL_LINE_TO_WAIT |
253 |
|
|
EXP_DATA_COLLECTION_MODE |
258 |
|
|
EXP_DATA_COLLECTION_TYPE |
262 |
|
|
EXP_SKIPFRAMES |
274 |
|
|
EXP_CLR_INT_CNTR |
276 |
|
|
EXP_ENABLE_INT_CNTR |
277 |
|
|
EXP_INT_CNTR |
278 |
|
|
EXP_INTERNAL_SYNC_SRC |
279 |
|
|
EXP_SW_EXTSYNC |
280 |
|
|
EXP_PTG_PRESENT |
281 |
|
|
EXP_ELEC_SHT |
282 |
|
|
EXP_BOARDS_WITH_NVRAM |
283 |
|
|
EXP_ANLGMASTER_ST143 |
284 |
|
|
EXP_ANLGSLAVE_ST143 |
285 |
|
|
EXP_DISPLAY_ST143 |
286 |
|
|
EXP_INTRFACE_ST143 |
287 |
|
|
EXP_SCANCONTROL_ST143 |
288 |
|
|
EXP_NUMBERFRAMES_IRQ |
204 |
|
|
EXP_COOL_TYPE |
214 |
|
|
EXP_HD_TYPE |
215 |
|
|
EXP_INTENSIFER_GAIN |
216 |
|
|
EXP_SHT_GATE_MODE |
217 |
|
|
EXP_HD_CHECK |
218 |
|
|
EXP_AMP_MODE |
219 |
|
|
EXP_ANALOG_GAIN |
220 |
|
|
EXP_HW_FIXES |
221 |
|
|
EXP_PCI_CARDS |
222 |
|
|
EXP_NOT_REVERSE |
223 |
|
|
EXP_LOAD_NVRAM_DEFAULTS |
234 |
|
|
EXP_CNTR_BRD |
235 |
|
|
EXP_XDIMHW |
237 |
|
|
EXP_YDIMHW |
238 |
|
|
EXP_SPECIAL_FAST_RDOUT |
254 |
|
|
EXP_SPCL_FAST_Y_DIM |
255 |
|
|
EXP_SPCL_FAST_X_DIM |
256 |
|
|
EXP_SPCL_FAST_Y_INDEX |
257 |
|
|
EXP_SHUTTER_COMP_TIME_MS |
266 |
|
|
EXP_NVRAM_AVAIL |
267 |
|
|
EXP_NUMBER_AGAIN_AVAIL |
269 |
|
|
EXP_SENSOR_TYPE |
270 |
|
|
EXP_EVENT_TYPE |
292 |
|
|
EXP_ANTI_BLOOMING |
293 |
|
|
EXP_FAST_PULSE_ENABLE |
233 |
|
|
EXP_USE_HEADCALIB |
296 |
|
|
EXP_CLASSNAME |
775 |
Controller name as ASCII string |
|
EXP_FLATFLDNAME |
776 |
Name of the experiment flatfield source file |
|
EXP_DARKNAME |
777 |
Name of the experiment background source file |
|
EXP_SETUPNAME |
778 |
Name of the experiment setup save file |
|
EXP_ACCESSNAME |
779 |
Name of the experiment access pattern save file |
|
EXP_DATFILENAME |
780 |
Default base name for the data file |
|
EXP_ABSORBFILENAME |
781 |
Name of the experiment absorbance source file |
|
EXP_BLEMISHFILENAME |
782 |
Name of the experiment blemish source file |
|
EXP_COSMICFILENAME |
783 |
Name of the experiment cosmic source file |
|
EXP_FILEINCBASENAME |
784 |
Starting name for automatic filename incrementing |
|
EXP_YTNAME |
785 |
Name of the experiment YT data file |
|
EXP_DEVNAME |
786 |
|
|
EXP_USEROI |
787 |
Use Full chip / ROI flag |
|
EXP_DOBLEMISH |
788 |
Blemish flag and file |
|
EXP_DOABSORB |
789 |
Absorbance method (include disabled) |
|
EXP_DOCOSMIC |
790 |
Cosmic flag (temporal spatial or disabled) |
|
EXP_COSMICSENS |
791 |
Cosmic sensitivity (it seems low today) |
|
EXP_ABSORBSTRIP |
792 |
Absorbance strip number |
|
EXP_DATATYPE |
793 |
Experiment datatype (include type AUTO) |
|
EXP_OVERWRITECONFIRM |
794 |
Overwrite confirmation |
|
EXP_FILEINCENABLE |
795 |
File increment enable |
|
EXP_FILEINCCOUNT |
796 |
File increment count |
|
EXP_RUNNING |
797 |
Get controller running status |
|
EXP_SAVEROPT |
798 |
Screen Saver/Blanker options |
|
EXP_TIME_UNITS |
799 |
Returns valid time units for controller. |
|
EXP_FILEACCESS |
800 |
Overwrite/Append on new data file |
|
EXP_AUTOSAVE |
801 |
Automatically save named files |
|
EXP_NEWWINDOW |
802 |
Use new Window for every run |
|
EXP_XDIM |
803 |
Get data X dimension |
|
EXP_YDIM |
804 |
Get data Y dimension |
|
EXP_XDIMDET |
805 |
Get detector X dimension |
|
EXP_YDIMDET |
806 |
Get detector Y dimension |
|
EXP_ROIMODE |
807 |
1:Spectroscopy mode 0:Imaging mode |
|
EXP_NUMREPEATSEXP |
808 |
Number of Times To Repeat Experiment |
|
EXP_NUMACCUMSEXP |
809 |
Number of Times To Accumulate Experiment |
|
EXP_THREADSTATE |
810 |
|
|
EXP_USEMINTHRESHOLDING |
811 |
Minimum Thresholding - 0=disabled 1=enabled |
|
EXP_MINTHRESHOLDVALUE |
812 |
Minimum Threshold Value |
|
EXP_USEMAXTHRESHOLDING |
813 |
Maximum Thresholding - 0=disabled 1=enabled |
|
EXP_MAXTHRESHOLDVALUE |
814 |
Maximum Threshold Value |
|
EXP_RUNNING_EXPERIMENT |
815 |
1 = Entire Experiment Running 0 = Not Running |
|
EXP_THRESHOLD_DEMAND_UPDATE |
816 |
Threshold Demand Update |
|
EXP_ROICOUNT |
817 |
Gets number of ROIs stored (read-only) |
|
EXP_ACCUMS |
818 |
|
|
EXP_CACCUMS |
819 |
|
|
EXP_CSEQUENTS |
820 |
|
|
EXP_PHOTON_ESTIMATION_ENABLE |
821 |
|
|
EXP_PHOTON_MAXTIME |
822 |
|
|
EXP_PHOTON_MAXTIMEUNIT |
823 |
|
|
EXP_CUSTOMFILTER_ENABLE |
824 |
|
|
EXP_CUSTOMFILTER_SIZE |
825 |
|
|
EXP_LOOKUPTABLE_ENABLE |
826 |
|
|
EXP_BSHOWWINDOW |
827 |
|
|
EXP_BBACKSUBTRACT |
828 |
|
|
EXP_BDOFLATFIELD |
829 |
|